Honda CBR 600F Decal Vinyl Stickers Set

Upgrade the look of your bike with this Honda CBR 600F style decal set – a clean and aggressive way to refresh your fairings without repainting.

This set is designed for riders who want a factory-inspired look with a custom touch. Perfect for restoration projects, track bikes, or simply giving your motorcycle a sharper, more modern appearance.

Each decal is carefully cut from high-quality vinyl, ensuring crisp edges and a professional finish when applied properly.

✔ What’s included:

– Honda lettering – 2 pcs (21 cm / 8.2”)

– Honda lettering – 2 pcs (8 cm / 3.1”)

– Wing logos – 2 pcs (12 cm / 4.7”)

– CBR decals – 2 pcs (20 cm / 7.8”)

– 600F decals – 2 pcs (23 cm / 9.0”)

Here are the recommended application steps for the caliper decals:

1. Clean the surface thoroughly. It should be completely free of dust, brake residue, oil, grease, or any dressing products. For best results, wipe the area with alcohol and let it dry fully.

2. Before applying, do a dry test fit. Hold the decal in place first so you can see exactly where you want it to sit.

3. Slowly peel the backing paper away from the decal. Make sure the decal stays attached to the clear transfer tape as you peel it off the backing.

4. Once the decal is on the transfer tape, carefully place it onto the surface in the desired position.

5. Press it down firmly using your fingers or plastic card, working from the center outward to help avoid bubbles and to make sure the decal lays flat.

6. After that, slowly peel the clear transfer tape off at a sharp angle. Do this carefully and gradually. If any part of the decal starts lifting with the tape, press that section back down and continue peeling more slowly.

7. Once the transfer tape is removed, press over the decal again firmly to make sure all edges are fully attached.

A few extra tips:

• Apply only to a clean and completely dry surface

• Do not rush when peeling the backing or transfer tape

• A slow peel works best

• Avoid touching the adhesive side with your fingers before application

If you have any questions during installation, feel free to message us anytime — we’re always happy to help.